Touch Button System Classroom

This is a general help guide for all classrooms with this style touch panel. While the steps and location of buttons are the same regardless of which style room you are in, there may be slight discrepancies in font, color, options and icons, dependent on the slight differences in hardware.

For specific details about your classroom, please refer to the Installed Classroom Equipment Guide or contact AV.

Audience: Faculty, Staff and Teaching Assistants

This KB Article References: Classroom Technology and Support Solutions
This Information is Intended for: Faculty, Staff, Teaching Assistants
Last Updated: September 21, 2020
Average Rating: Not Rated
Your feedback is important to us, help us by logging in to rate this article and provide feedback.

Step 1: Power on and/or connect your device.

Option A. If using the installed computer, wave the mouse to wake up the computer.

Log in using your NetID and password.

 

Option B. If using your own device,  plug in the necessary cables.

In a Computer Station Classroom, locate the Aux Input plate on the side of the media station.

 

Step 2: Locate the touch panel.

 

Step 3: Turn on the projector by tapping the power icon on the bottom right-hand corner of the screen.

 

Step 4: A "Wait" Icon will flash on the touch panel while the system warms up.

 

Step 4a: The 'Power' button on the lower left-hand corner of the screen will now appear blue to indicate the projector is on and the source options will appear on the screen.

 

Step 5: Select a Source

Tap the necessary icon once to select your source. The currently selected source will be highlighted blue.


Optional steps to navigate system controls:

  • Adjust volume at the bottom of the screen

  • To momentarily blank the projector but not turn if off, tap the 'Image Mute' button on the bottom of the screen.

When Image Mute is active, the button on the bottom of the screen will flash on and off.

Step 5: To power off the system, press and holdthe 'Power' button in the lower-right hand corner for 3 seconds.

Step 5a:  A "Wait" icon will flash on the touch panel while the system powers off.

Additional Information


There are no additional resources available for this article.

Provide Feedback


Your feedback is important to us, help us by logging in to rate this article and provide feedback.

Sign in with NetID

Getting Help


The Division of Information Technology provides support on all of our services. If you require assistance please submit a support ticket through the IT Service Management system.

Submit A Quick Ticket

Supported By


Classroom Technology & Support Solutions West Campus